.jpg)
.jpg)
.jpg)
New products
Light Cure Orthodontic Adhesive for Lingual Retainers, Stops and Aligner Attachments - easy to handle.
Like GC Ortho Connect, GC Ortho Connect Flow’s primer is integrated into the paste, allowing to save valuable time in the bonding process. GC Ortho ConnectTM Flow makes it especially easy to bond lingual retainer wires.
Like GC Ortho Connect, GC Ortho Connect Flow’s primer is integrated into the paste, allowing to save valuable time in the bonding process. GC Ortho ConnectTM Flow makes it especially easy to bond lingual retainer wires.
Multilayer® 3D
Gradual hardness & Gradual translucency & Gradual color
3D multilayer realizes natural gradient of color,gradient of translucency and gradient of strength in a real sense, achieving another revolution of dental material and revolutionizing dentistry once again！
Color gradient:
6 layers of natural color transition, matching color gradient of natural tooth from cervical to incisal.
Translucency gradient:
Translucency from 57% in incisal to 43% in cervical.It shows gradient decrease,achieving life-like transparency of natural tooth enamel while low transparency in cervical has effective opaque！
Strength gradient:
Strength gradient from 600 Mpa to 900 Mpa. It achieves low strength in occlusion and causes no harm to opposing dentin. High strength in base part realizes long bridge restoration！
Indications:
1) Anterior full contour (crown &bridge)
2) Posterior full contour (crown &bridge)
Color classification:
1) A1 A2 A3 A3.5 A4
2) B1 B2 B3 B4
3) C1 C2 C3 C4
4) D2 D3 D4
Chemical composition and Mechanical property:
1) Sintered Density ≥6g/cm³
2) Fracture Toughness =5Mpam½
3) Hardness(Hv 10) =1250
Flexural strength:
percentage thickness Strength
1st layer(light shade) 20% ≥600Mpa
2nd layer 15% ≥660Mpa
3rd layer 15% ≥730Mpa
4th layer 15% ≥780Mpa
5th layer 15% ≥830Mpa
6th layer 20% ≥900Mpa
Mechanical property:
Sintered Density ≥ 6.0 g/cm³
Bending Strength ≥ 900Mpa
Fracture toughness 5Mpam½
Hardness （Hv 10） 1250
Certification：FDA-America
Certification：ISO13485
Certification：CE
Certification：SFDA-China
Certification：KFDA-South Korea
Certification：PMDA-Japan
Gradual hardness & Gradual translucency & Gradual color
3D multilayer realizes natural gradient of color,gradient of translucency and gradient of strength in a real sense, achieving another revolution of dental material and revolutionizing dentistry once again！
Color gradient:
6 layers of natural color transition, matching color gradient of natural tooth from cervical to incisal.
Translucency gradient:
Translucency from 57% in incisal to 43% in cervical.It shows gradient decrease,achieving life-like transparency of natural tooth enamel while low transparency in cervical has effective opaque！
Strength gradient:
Strength gradient from 600 Mpa to 900 Mpa. It achieves low strength in occlusion and causes no harm to opposing dentin. High strength in base part realizes long bridge restoration！
Indications:
1) Anterior full contour (crown &bridge)
2) Posterior full contour (crown &bridge)
Color classification:
1) A1 A2 A3 A3.5 A4
2) B1 B2 B3 B4
3) C1 C2 C3 C4
4) D2 D3 D4
Chemical composition and Mechanical property:
1) Sintered Density ≥6g/cm³
2) Fracture Toughness =5Mpam½
3) Hardness(Hv 10) =1250
Flexural strength:
percentage thickness Strength
1st layer(light shade) 20% ≥600Mpa
2nd layer 15% ≥660Mpa
3rd layer 15% ≥730Mpa
4th layer 15% ≥780Mpa
5th layer 15% ≥830Mpa
6th layer 20% ≥900Mpa
Mechanical property:
Sintered Density ≥ 6.0 g/cm³
Bending Strength ≥ 900Mpa
Fracture toughness 5Mpam½
Hardness （Hv 10） 1250
Certification：FDA-America
Certification：ISO13485
Certification：CE
Certification：SFDA-China
Certification：KFDA-South Korea
Certification：PMDA-Japan
Multilayer® 3D
Gradual hardness & Gradual translucency & Gradual color
3D multilayer realizes natural gradient of color,gradient of translucency and gradient of strength in a real sense, achieving another revolution of dental material and revolutionizing dentistry once again！
Color gradient:
6 layers of natural color transition, matching color gradient of natural tooth from cervical to incisal.
Translucency gradient:
Translucency from 57% in incisal to 43% in cervical.It shows gradient decrease,achieving life-like transparency of natural tooth enamel while low transparency in cervical has effective opaque！
Strength gradient:
Strength gradient from 600 Mpa to 900 Mpa. It achieves low strength in occlusion and causes no harm to opposing dentin. High strength in base part realizes long bridge restoration！
Indications:
1) Anterior full contour (crown &bridge)
2) Posterior full contour (crown &bridge)
Color classification:
1) A1 A2 A3 A3.5 A4
2) B1 B2 B3 B4
3) C1 C2 C3 C4
4) D2 D3 D4
Chemical composition and Mechanical property:
1) Sintered Density ≥6g/cm³
2) Fracture Toughness =5Mpam½
3) Hardness(Hv 10) =1250
Flexural strength:
percentage thickness Strength
1st layer(light shade) 20% ≥600Mpa
2nd layer 15% ≥660Mpa
3rd layer 15% ≥730Mpa
4th layer 15% ≥780Mpa
5th layer 15% ≥830Mpa
6th layer 20% ≥900Mpa
Mechanical property:
Sintered Density ≥ 6.0 g/cm³
Bending Strength ≥ 900Mpa
Fracture toughness 5Mpam½
Hardness （Hv 10） 1250
Certification：FDA-America
Certification：ISO13485
Certification：CE
Certification：SFDA-China
Certification：KFDA-South Korea
Certification：PMDA-Japan
Gradual hardness & Gradual translucency & Gradual color
3D multilayer realizes natural gradient of color,gradient of translucency and gradient of strength in a real sense, achieving another revolution of dental material and revolutionizing dentistry once again！
Color gradient:
6 layers of natural color transition, matching color gradient of natural tooth from cervical to incisal.
Translucency gradient:
Translucency from 57% in incisal to 43% in cervical.It shows gradient decrease,achieving life-like transparency of natural tooth enamel while low transparency in cervical has effective opaque！
Strength gradient:
Strength gradient from 600 Mpa to 900 Mpa. It achieves low strength in occlusion and causes no harm to opposing dentin. High strength in base part realizes long bridge restoration！
Indications:
1) Anterior full contour (crown &bridge)
2) Posterior full contour (crown &bridge)
Color classification:
1) A1 A2 A3 A3.5 A4
2) B1 B2 B3 B4
3) C1 C2 C3 C4
4) D2 D3 D4
Chemical composition and Mechanical property:
1) Sintered Density ≥6g/cm³
2) Fracture Toughness =5Mpam½
3) Hardness(Hv 10) =1250
Flexural strength:
percentage thickness Strength
1st layer(light shade) 20% ≥600Mpa
2nd layer 15% ≥660Mpa
3rd layer 15% ≥730Mpa
4th layer 15% ≥780Mpa
5th layer 15% ≥830Mpa
6th layer 20% ≥900Mpa
Mechanical property:
Sintered Density ≥ 6.0 g/cm³
Bending Strength ≥ 900Mpa
Fracture toughness 5Mpam½
Hardness （Hv 10） 1250
Certification：FDA-America
Certification：ISO13485
Certification：CE
Certification：SFDA-China
Certification：KFDA-South Korea
Certification：PMDA-Japan
The fine tips allow intra oral bending of the archwire. To be used on Nickel Titanium wire up to .020" (.51mm).
Multilayer® 3D
Gradual hardness & Gradual translucency & Gradual color
3D multilayer realizes natural gradient of color,gradient of translucency and gradient of strength in a real sense, achieving another revolution of dental material and revolutionizing dentistry once again！
Color gradient:
6 layers of natural color transition, matching color gradient of natural tooth from cervical to incisal.
Translucency gradient:
Translucency from 57% in incisal to 43% in cervical.It shows gradient decrease,achieving life-like transparency of natural tooth enamel while low transparency in cervical has effective opaque！
Strength gradient:
Strength gradient from 600 Mpa to 900 Mpa. It achieves low strength in occlusion and causes no harm to opposing dentin. High strength in base part realizes long bridge restoration！
Indications:
1) Anterior full contour (crown &bridge)
2) Posterior full contour (crown &bridge)
Color classification:
1) A1 A2 A3 A3.5 A4
2) B1 B2 B3 B4
3) C1 C2 C3 C4
4) D2 D3 D4
Chemical composition and Mechanical property:
1) Sintered Density ≥6g/cm³
2) Fracture Toughness =5Mpam½
3) Hardness(Hv 10) =1250
Flexural strength:
percentage thickness Strength
1st layer(light shade) 20% ≥600Mpa
2nd layer 15% ≥660Mpa
3rd layer 15% ≥730Mpa
4th layer 15% ≥780Mpa
5th layer 15% ≥830Mpa
6th layer 20% ≥900Mpa
Mechanical property:
Sintered Density ≥ 6.0 g/cm³
Bending Strength ≥ 900Mpa
Fracture toughness 5Mpam½
Hardness （Hv 10） 1250
Certification：FDA-America
Certification：ISO13485
Certification：CE
Certification：SFDA-China
Certification：KFDA-South Korea
Certification：PMDA-Japan
Gradual hardness & Gradual translucency & Gradual color
3D multilayer realizes natural gradient of color,gradient of translucency and gradient of strength in a real sense, achieving another revolution of dental material and revolutionizing dentistry once again！
Color gradient:
6 layers of natural color transition, matching color gradient of natural tooth from cervical to incisal.
Translucency gradient:
Translucency from 57% in incisal to 43% in cervical.It shows gradient decrease,achieving life-like transparency of natural tooth enamel while low transparency in cervical has effective opaque！
Strength gradient:
Strength gradient from 600 Mpa to 900 Mpa. It achieves low strength in occlusion and causes no harm to opposing dentin. High strength in base part realizes long bridge restoration！
Indications:
1) Anterior full contour (crown &bridge)
2) Posterior full contour (crown &bridge)
Color classification:
1) A1 A2 A3 A3.5 A4
2) B1 B2 B3 B4
3) C1 C2 C3 C4
4) D2 D3 D4
Chemical composition and Mechanical property:
1) Sintered Density ≥6g/cm³
2) Fracture Toughness =5Mpam½
3) Hardness(Hv 10) =1250
Flexural strength:
percentage thickness Strength
1st layer(light shade) 20% ≥600Mpa
2nd layer 15% ≥660Mpa
3rd layer 15% ≥730Mpa
4th layer 15% ≥780Mpa
5th layer 15% ≥830Mpa
6th layer 20% ≥900Mpa
Mechanical property:
Sintered Density ≥ 6.0 g/cm³
Bending Strength ≥ 900Mpa
Fracture toughness 5Mpam½
Hardness （Hv 10） 1250
Certification：FDA-America
Certification：ISO13485
Certification：CE
Certification：SFDA-China
Certification：KFDA-South Korea
Certification：PMDA-Japan
Ixion Aligner Pliers are specially designed to prevent distortion of the aligner without the need to heat the plier. The ultra slim tips provide easy access incisally, even with lower anterior aligners.
The IX888 Rotation Aligner Plier creates a vertical indentation, 1.5mm x 0.75mm, for individual tooth rotation.
The IX888 Rotation Aligner Plier creates a vertical indentation, 1.5mm x 0.75mm, for individual tooth rotation.
