Easy access to difficult to reach areas such as: palate, retromolar pad.
Adapter rotation accommodates insertion angles.

Single strand NICKEL FREE titanium flat metal ribbon with increased interproximal strength is ideal for semi permanent splinting and maintaining difficult extraction sites.

Eliminates potential patient allergy issues
Reduced wear rate
Increased interproximal strength
60" total - 10 (6 inch) strands

Dimension: Metric: 0.694 mm (w) x 0.297 mm (h) / Standard: 0.02735 in (w) x 0.01170 (h)

Multilayer® 3D

Gradual hardness & Gradual translucency & Gradual color
3D multilayer realizes natural gradient of color,gradient of translucency and gradient of strength in a real sense, achieving another revolution of dental material and revolutionizing dentistry once again！

Color gradient:

6 layers of natural color transition, matching color gradient of natural tooth from cervical to incisal.

Translucency gradient:

Translucency from 57% in incisal to 43% in cervical.It shows gradient decrease,achieving life-like transparency of natural tooth enamel while low transparency in cervical has effective opaque！

Strength gradient:

Strength gradient from 600 Mpa to 900 Mpa. It achieves low strength in occlusion and causes no harm to opposing dentin. High strength in base part realizes long bridge restoration！

Indications:

1) Anterior full contour (crown &bridge)
2) Posterior full contour (crown &bridge)

Color classification:

1) A1 A2 A3 A3.5 A4
2) B1 B2 B3 B4
3) C1 C2 C3 C4
4) D2 D3 D4

Chemical composition and Mechanical property:

1) Sintered Density ≥6g/cm³
2) Fracture Toughness =5Mpam½
3) Hardness(Hv 10) =1250

Flexural strength:

percentage thickness Strength

1st layer(light shade) 20% ≥600Mpa
2nd layer 15% ≥660Mpa
3rd layer 15% ≥730Mpa
4th layer 15% ≥780Mpa
5th layer 15% ≥830Mpa
6th layer 20% ≥900Mpa

Mechanical property:

Sintered Density ≥ 6.0 g/cm³
Bending Strength ≥ 900Mpa
Fracture toughness 5Mpam½
Hardness （Hv 10） 1250
Certification：FDA-America
Certification：ISO13485
Certification：CE
Certification：SFDA-China
Certification：KFDA-South Korea
Certification：PMDA-Japan

Ixion Aligner Pliers are specially designed to prevent distortion of the aligner without the need to heat the plier. The ultra slim tips provide easy access incisally, even with lower anterior aligners.

The IX888 Rotation Aligner Plier creates a vertical indentation, 1.5mm x 0.75mm, for individual tooth rotation.

Ixion Aligner Pliers are specially designed to prevent distortion of the aligner without the need to heat the plier. The ultra slim tips provide easy access incisally, even with lower anterior aligners.

The IX887 Torque Aligner Plier creates a horizontal indentation, 0.75mm x 1.5mm, for individual root torque.

The Orthonia is a high performing battery-powered torque driver used for placing TADs. It helps to mitigate TAD failures during insertion procedures.

Driver adapter for straight shaft included.