Similar products
One Step System:
No need to apply primer or adhesive on the tooth, as it is already incorporated into the paste.
A simple etching of the enamel followed by drying is enough to prepare the bracket or buccal tube for bonding.
1. Clean tooth surfaces with pumice and water. Rinse thoroughly with water and dry.
2. Etch the tooth surfaces with GC Ortho Etching Gel for 30 sec., rinse and dry. Porcelain-, metal-, composite-restored teeth should be treated with the appropriate conditioner.
3. Coat the bonding surface of the bracket with GC Ortho Connect paste.
4. Remove the excess adhesive using an explorer or scaler.
5. Cure each bracket for 10 seconds mesially and distally with an LED curing light.
No need to apply primer or adhesive on the tooth, as it is already incorporated into the paste.
A simple etching of the enamel followed by drying is enough to prepare the bracket or buccal tube for bonding.
1. Clean tooth surfaces with pumice and water. Rinse thoroughly with water and dry.
2. Etch the tooth surfaces with GC Ortho Etching Gel for 30 sec., rinse and dry. Porcelain-, metal-, composite-restored teeth should be treated with the appropriate conditioner.
3. Coat the bonding surface of the bracket with GC Ortho Connect paste.
4. Remove the excess adhesive using an explorer or scaler.
5. Cure each bracket for 10 seconds mesially and distally with an LED curing light.
Assure Plus Resin will increase surface adhesion to normal, atypical, dry or slightly contaminated enamel, and now zirconia and acrylic temps without additional primers. This universal bonding agent bonds to metal restorations and now porcelain without hydrofluoric acid. Can be used with any light or chemical cure system.