Bond Aligner
Clear light cure adhesive to adhere metal, ceramic or plastic attachments to any aligner plastic.
Tellimiseks Logi sisse või Registreeru kasutajaks !
Tootekood: BA
Sarnased tooted
Flow Tain is a photocurable composite with a low modulus of elasticity, thus making it ideal for use with lingual retainers, fibres and other splinting materials as it is not as stiff or brittle as conventional composites. The material is highly polishable, which reduces wear. Using the tips provided with the syringe allows injection onto lingual surfaces and through splints.
One Step System:
No need to apply primer or adhesive on the tooth, as it is already incorporated into the paste.
A simple etching of the enamel followed by drying is enough to prepare the bracket or buccal tube for bonding.
1. Clean tooth surfaces with pumice and water. Rinse thoroughly with water and dry.
2. Etch the tooth surfaces with GC Ortho Etching Gel for 30 sec., rinse and dry. Porcelain-, metal-, composite-restored teeth should be treated with the appropriate conditioner.
3. Coat the bonding surface of the bracket with GC Ortho Connect paste.
4. Remove the excess adhesive using an explorer or scaler.
5. Cure each bracket for 10 seconds mesially and distally with an LED curing light.
No need to apply primer or adhesive on the tooth, as it is already incorporated into the paste.
A simple etching of the enamel followed by drying is enough to prepare the bracket or buccal tube for bonding.
1. Clean tooth surfaces with pumice and water. Rinse thoroughly with water and dry.
2. Etch the tooth surfaces with GC Ortho Etching Gel for 30 sec., rinse and dry. Porcelain-, metal-, composite-restored teeth should be treated with the appropriate conditioner.
3. Coat the bonding surface of the bracket with GC Ortho Connect paste.
4. Remove the excess adhesive using an explorer or scaler.
5. Cure each bracket for 10 seconds mesially and distally with an LED curing light.
Assure Plus Resin will increase surface adhesion to normal, atypical, dry or slightly contaminated enamel, and now zirconia and acrylic temps without additional primers. This universal bonding agent bonds to metal restorations and now porcelain without hydrofluoric acid. Can be used with any light or chemical cure system.