WIRE 14´´ BLUE ELG 17X22
Blue Elgiloy is initially the softest of the tempers. It can be welded with low heat, and soldered without embrittling. Blue Elgiloy is recommended when the wire to be used is over .020” (0.508mm) or when the wire requires considerable bending, welding or soldering. Excellent for edgewise arches, lingual arches, retainers and removables.
Superior physical properties
Longer functioning as a resilient spring wire without distortion or fatigue
Easy soldering without annealing
Easy heat-treating to increase physical properties
Simple electrolyte polishing
SKU: E00307
Qty: Out of Stock
Qty: Out of Stock
Similar products
Quick and easy connection of Dento-Prep.
We have designed a range of connectors that make it easy to install Dento-Prep micro blaster. For easy use at the chairside it can be connected to the turbine coupling or turbine hose - and for permanent use it can be connected directly to the compressed air.
Connection to turbine coupling. Quick and easy access to compressed air through the turbine coupling with a quick connector. Available for Sirona, W&H, KaVo, BienAir and NSK. Content: 1 connector, 1 hose (1.5 m) and 1 quick connector.
Connection to the turbine hose. The 4-pin MidWest connector is universal and can be screwed into all standard 4-hole air turbine hoses.
Connection directly to compressed air supply. Permanent connection to the air supply line with an Installation Kit.
Content: 1 hose, 1 tee-fitting, 1 female quick connector and 1 plug.
We have designed a range of connectors that make it easy to install Dento-Prep micro blaster. For easy use at the chairside it can be connected to the turbine coupling or turbine hose - and for permanent use it can be connected directly to the compressed air.
Connection to turbine coupling. Quick and easy access to compressed air through the turbine coupling with a quick connector. Available for Sirona, W&H, KaVo, BienAir and NSK. Content: 1 connector, 1 hose (1.5 m) and 1 quick connector.
Connection to the turbine hose. The 4-pin MidWest connector is universal and can be screwed into all standard 4-hole air turbine hoses.
Connection directly to compressed air supply. Permanent connection to the air supply line with an Installation Kit.
Content: 1 hose, 1 tee-fitting, 1 female quick connector and 1 plug.
Biting down on these firm foam cylinders helps to seat aligners and make treatment proceed smoothly and quickly. With proper care, two aligner chewies can last for the duration of one aligner. They can be cleaned with soap and water , diluted mouthwash or with appliance cleaning tablets.
Each pack contains 10 bags of 2 chewies in a hygienic sealed bag.
Each pack contains 10 bags of 2 chewies in a hygienic sealed bag.
Soft zip lock bag. Kit includes: Dual head toothbrush, ortho travel toothbrush, 2-minute timer, interproximal brush, mouth mirror, relief wax, 15m floss and packet of 10 floss threaders. Available in 5 bright colours.
Sold in packs of 12.
Sold in packs of 12.
Quick and easy connection of Dento-Prep.
We have designed a range of connectors that make it easy to install Dento-Prep micro blaster. For easy use at the chairside it can be connected to the turbine coupling or turbine hose - and for permanent use it can be connected directly to the compressed air.
Connection to turbine coupling. Quick and easy access to compressed air through the turbine coupling with a quick connector. Available for Sirona, W&H, KaVo, BienAir and NSK. Content: 1 connector, 1 hose (1.5 m) and 1 quick connector.
Connection to the turbine hose. The 4-pin MidWest connector is universal and can be screwed into all standard 4-hole air turbine hoses.
Connection directly to compressed air supply. Permanent connection to the air supply line with an Installation Kit.
Content: 1 hose, 1 tee-fitting, 1 female quick connector and 1 plug.
We have designed a range of connectors that make it easy to install Dento-Prep micro blaster. For easy use at the chairside it can be connected to the turbine coupling or turbine hose - and for permanent use it can be connected directly to the compressed air.
Connection to turbine coupling. Quick and easy access to compressed air through the turbine coupling with a quick connector. Available for Sirona, W&H, KaVo, BienAir and NSK. Content: 1 connector, 1 hose (1.5 m) and 1 quick connector.
Connection to the turbine hose. The 4-pin MidWest connector is universal and can be screwed into all standard 4-hole air turbine hoses.
Connection directly to compressed air supply. Permanent connection to the air supply line with an Installation Kit.
Content: 1 hose, 1 tee-fitting, 1 female quick connector and 1 plug.